D8038V24H.PDF
	CAD File

Fan housing :
- Material for size larger than 60x60x10mm is Thermoplastic UL 94V-0 PBT (30% Fiber)
- Material for size equal or smaller than 60x60x10mm is Thermoplastic UL 94V-0 PBT (15% Fiber)

Fan blade :
- Material is Thermoplastic UL 94V-0 PBT (15% Fiber)

Lead wire :
- AWG # 28/30 for size equal or smaller than 40x40x8mm, 150mm length, material is UL approved
- AWG # 26/28 for size between 40x40x10mm to 60x60x15mm, 300mm length, material is UL approved
- AWG # 24/26 for size between 60x60x25mm to 120x120x38mm, 300mm length, material is UL approved

Insulation resistance :
- Minimum 10M at 500VDC between housing and both lead wires

Dielectric strength :
- Withstand 600VAC for one minute 1mA between housing and both lead wires

Operating temperature :
- —10°C~+70°C, high/low temperature test for 24 hours, temperature change: 30°C/hour

Storage temperature :
- —40°C~+70°C, high/low temperature test for 24 hours, temperature change: 30°C/hour

Basic locked rotor protection :
- no coil & board damaged

Optional device :
- Lock rotor protection with FG/RD signal output
- Temperature sensor
- Techometer output